whemall.blogg.se - Dahua config tool not working

#DAHUA CONFIG TOOL NOT WORKING HOW TO#
#DAHUA CONFIG TOOL NOT WORKING SOFTWARE#
#DAHUA CONFIG TOOL NOT WORKING PASSWORD#
#DAHUA CONFIG TOOL NOT WORKING TV#
#DAHUA CONFIG TOOL NOT WORKING MAC#

#DAHUA CONFIG TOOL NOT WORKING TV#

The audio from your camera (channel) can now be heard in either the gDMSS or iDMSS phone app or directly from the TV where the DVR is hooked up (ensure that the monitor has speakers and turn up the volume). Click the Save button to save the audio settings to your DVR.

Note: If an external microphone is being used on your setup and is being plugged into the Audio In port on the back of your DVR, you can select Local.

Since the audio will be coming from the camera side (meaning the camera has a built-in mic), click on the Audio Source drop down menu and select HDCVI. Click on the Encode Mode drop down menu and select either G.711u or AAC. Select Encode and make sure the Smart Codec is set to Off. Click on the Management tab and select Camera.

#DAHUA CONFIG TOOL NOT WORKING PASSWORD#

Use your admin username and password to login. Make sure your DVR is connected to the local network. Audio related issues: no audio, microphone not working or audio is not being recorded.

#DAHUA CONFIG TOOL NOT WORKING HOW TO#

The guide below shows how to fix audio issues on a Dahua HD-CVI DVR. This issue can be resolved directly from the DVR’s interface, however, it is recommended to use the web user interface via any web browser (better to use Internet Explorer).

By default, the Smart Codec feature is turned off, however, if it is turned on for any reason, it will need to be turned off in order for the microphone to pick up audio. Audio settings are always controlled by the DVR, however, may need to be turned on manually by the user since the audio settings are usually disabled by default (since many legislation don’t allow audio recording).Īudio related issues may also be caused by the Smart Codec feature being enabled which may block audio capabilities of the camera. This applies not only to IP cameras, and all devices operating in a computer network.Most of the Dahua HD-CVI cameras have the ability to pick up sound via a built-in or external microphone. the penultimate number of IP addresses to devices on the same network must be identical.

#DAHUA CONFIG TOOL NOT WORKING MAC#

To find the IP camera Dahua in the local network and change its IP address, you can use the service utility Dahua config tool.ģ) To find the IP address of the camera, any other device (router, computer, smartphone connected to your network), you can use the program to scan IP addresses, such as Advanced IP Scanner, which can scan IP and MAC addresses of all devices on your network.ĭo not forget that successful collaboration IP address of your computer and the IP address of your camera should be on the same subnet, i. Of course, at the manufacturer's site IP camera can usually find the service software.įor example, to find the IP camera Hikvision in the local network and change its IP address, you can use the service utility SADP.

#DAHUA CONFIG TOOL NOT WORKING SOFTWARE#

It is recommended to connect the first one IP camera, change her IP address in accordance with your subnet address range, then the second etc.Ģ) Included with the IP camera or NVR can be a software that allows you to quickly find a new IP camera in the network, as well as change the IP address of the camera, make some necessary settings.

Hikvision - 192.0.0.64 Username: admin, password: 12345ĭo not connect multiple unconfigured IP cameras to the same local network, especially if the new cameras the same manufacturer, as they originally the same IP address - there is a conflict of IP addresses on the LAN.

If the IP camera previously used, it is possible to change the IP address, then it is desirable to reset the IP camera to the factory - in this case, locate and click on the camera button Reset.įor your reference, a default IP address of the popular brands of IP cameras: We describe several steps to simple IP Camera setup:ġ) If there is an instruction to the camcorder (paper or CD-ROM), it usually needs to be specified which IP address is set to the IP camera by default. To obtain an image from the IP camera connected to the NVR or to switch to a local computer network need to know its IP address.